Dingo

ROTARY HOE OVERVIEW

3 IN 1 GRAB OVERVIEW

STUMP GRINDER OVERVIEW

The rotary hoe is one of our most powerful tools. The Dingo Rotary Hoe has a full one metre cut and digs to 150mm deep. Like the trencher, the ground speed is controlled with the flow divider so the hoe can be worked at a speed relative to the toughness of the ground being hoed. This allows fine hoeing, regardless of the ground condition. Hoeing is done in the reverse direction so you can clearly see where you are going and you aren’t running over freshly tilled soil. Another common use for the rotary hoe is for loosening areas where dirt has to be removed. Great if you need to remove 150mm of material in preparation for a concrete slab, paving, playground surface etc. The Rotary Hoe breaks down the ground so the bucket can remove it leaving a clean flat bed for the new surface to be laid. SPECIFICATIONS Width of Cut: 1000mm Max Cutting Depth: 150mm Tines: Hardened, double edge Speed: Variable Approx Weight: 170kg Hydraulic Flow: 40-47 l/min Used For: Digging garden beds, loosening ground for removal Used By: Landscapers, Contractors, Hire Companies Goes With: Bucket

The Dingo 3 in1 Grab is a great site cleanup tool. It will grab logs in the jaw or an armful of branches, hay and other awkward or heavy materials. The Dingo 3 in 1 Grab is ideal for raking rocks or sticks from a jobsite. The grated floor allows the sand and dirt to fall through leaving the rubble in the grab. SPECIFICATIONS Width: 1200mm Approx Weight: 155kg Dump Height: All-Rounder: 1530mm Contractor: 1835mm

The Dingo Stump Grinder hangs over the stump and swings back and forth at 90° to the Dingo. This gives the operator unmatched visibility of the job and throws the chips away from the operator. In contrast to other mini loader stump grinders that require a dedicated 25hp engine to drive the stump grinder, the Dingo stump grinder uses the power of the Dingo’s unique multi pump hydraulic system. Why have the running costs of two engines when one will do? The Dingo Stump Grinder can be quickly changed to throw left, right or forward, so it can really get into

Used For:

Site clean ups and picking up heavy or awkward materials. Landscapers, Builders, Farmers, Tree Fellers & Councils.

those tight areas. SPECIFICATIONS Transport Width: Overall Height: Cutting Teeth: Wheel Diameter Wheel Speed: Max. Cutting Depth: Hydraulic Flow: Approx Weight:

Used By:

700mm 650mm

Tungsten tipped, fits 6 teeth

*Enquire about lead time.

434mm W/Teeth:

0 -3000RPM

600mm (Below Grade)

40-47 l/min

110kg

Used For: Used By:

Grinding stumps

Contractors, Arborists, Landscapers and National Parks